Build rose arch yourself – so succeeds the diy project

Build rose arch

© fineart-collection – Fotolia.com

You want to visually enhance your garden with a rose arch? Here are my instructions for building a rose arch yourself from wood or metal.

If you want to round off a process, passage, access or garden section in an inviting and beautiful way, a rose arch is particularly suitable for this among other things. Roses climbing up here look delicate, but also wild and attractive at the same time, so that guests can be impressed when walking through or sitting under it, but you yourself also better come to rest in your own garden. Because the rose arch not only acts as a kind of gate, but also provides a little shade and distance from the outside world. But buying a prefabricated rose arch can be both expensive and cumbersome. Because it is difficult to transport a rose arch in a conventional car. If you want to build a rose arch for various reasons, you will learn below how to make the project a success.

What speaks for the rose arch in the garden?

Whether you like the rose arch in the garden or not, is of course entirely dependent on your own taste and also the style of the already existing garden design. However, a beautifully designed rose arch has long been generally regarded as the eye-catcher par excellence, as it becomes almost invisible with the right plant trimming and provides a kind of plant gate, which creates a romantic, high-quality and luxurious atmosphere. The rose arch beautifies not only paths, entrances and passages, but also seating in the garden, by the pond or transitions from porch to garden. Front gardens also benefit from the rose arch, as it invites visitors in a friendly and noble way, gives a warm atmosphere and generally gives the impression that this property is particularly well taken care of.

A rose arch in the garden, front garden or on the sidewalk provides plenty of shade when the plants grow thickly. Also, together with other rose arches, it can become a kind of boundary in the garden, which is neither expensive, nor difficult to remove again. So there is hardly anything that speaks against the rose arch in the garden. Unless you simply do not like it visually.

Build rose arch – wood or metal?

A rose arch can be made of either metal, or wood. Both versions offer their own advantages, which is why you should consider in advance which version you would like for your own application.

AdvantagesDisadvantages
Rose arch made of metal Stainless steel varieties are particularly durable and stand up well to all weathers many models are covered with plastic to appear even more weatherproof – but this often puts the appearance at a disadvantage
most designs are rustproof extensions and repairs are much more difficult with metal rose arches
as a rule, somewhat more stable cool appearance
Wooden rose arch warm appearance construction itself is not quite as weather resistant, so proper glazing is important
repairs and changes are easy to make stabilizing foundation must be added
easy to build yourself
Different construction methods possible
Size can be determined by the customer
can be realized with little money
can be painted in the color of choice

As you can see, with both materials, the advantages outweigh the disadvantages. Therefore, the choice of material also depends largely on your own preferences. You should always choose the variant that best suits your own needs and budget, but also visually best fits the house, garden and other garden decorations.
© focus finder – Fotolia.com

Why build a rose arch yourself?

If you don’t consider crafting to be your hobby and are passionate about building things around the house and garden yourself, you can still find plenty of reasons to try your hand at the DIY project rose arch. For example, the rose arch brand self-made can save a lot of money. This is especially the case when you incorporate existing wood scraps and don’t have to buy additional materials or tools for it. The advantage is that you can choose the look freely, because rose arches are available in the hardware store and also online in limited selection. In addition, the framework can be deliberately built so that, for example, your favorite bench fits under it or you can expand the framework if necessary without effort. Some people enjoy building a rose arch only because it can be a fun activity with friends or family and can be combined with a barbecue in the garden. Whatever your motivation for the do-it-yourself project, with a little effort and creativity you will certainly be rewarded with an appealing result.

Building rose arch – what is needed?

The shopping list for the rose arch brand self-made is not too long – which is why you can often get away very cheaply. If you want to use a simple construction, you only need four round or square timbers about two meters high. By the way, bamboo poles or thin tree trunks are also suitable for this purpose, if you have them left over from your own garden or other projects. However, it is important that these have a good diameter and are sturdy, otherwise they could simply break during the next storm. Also note that you should choose weather-resistant wood or at least use a suitable glaze to protect other types of wood against the seasons.

Furthermore, you need a sufficient number of wood screws or alternatively bolt screws with matching nuts and washers. It should be noted that bolts are much more visible than long wood screws. For this purpose, they provide better support, especially with thicker woods. Normal wood screws are quick and easy to install, but again less stable.

Furthermore, you now need two crosspieces in the desired length, which provide the length of the rose arch and serve as the roof framework of the arch. Depending on the design you have come up with, small cross braces may also be needed. These can also serve as climbing aids for the plants and decorate the sides of the rose arch. For this you should also purchase wood screws or bolts.

For the whole thing to get a stable footing, you also need a foundation. Unless you want to securely stand the rose arch in another way. You have to dig the holes for it in the distance of the square timbers to each other. They should be at least 15cm in diameter to hold enough cement mix and stabilize the squared timbers. So you also need to buy enough cement mixture. As an alternative or for more stability, you can also concrete in beam shoes, which are made of metal and are available in hardware stores.

# Preview Product Evaluation Price
1 GAH-Alberts 331382 Beam shoe | Type A |. 487 ratings 11,60 € To the store
2 GAH-Alberts 335403 Beam shoe | Type B |. 126 Ratings 25,99 € 21,90 € To the store
3 GAH-Alberts 335922 Beam shoe | Type A. 90 reviews 36,17 € To the store

Build your own rose arch – step by step

Before you start building the rose arch, it is important to determine whether all the required parts are available. You can also put them into shape provisionally to see if the look will satisfy you as much as you had hoped after finishing them. Then follow the individual steps, which are worked off with the rose arch building.

Step 1 – Digging holes

First of all, you need to excavate appropriate ground holes before building the structure. If you would like to install joist shoes for the beams, it is now a matter of concreting them in and then allowing them to dry sufficiently. If you prefer to place the wooden posts directly into the concrete, you should of course wait with the mixing until after the construction is finished.

Step 2 – Assemble the scaffold

Now it is necessary to connect two of the vertical posts with the cross beams – either with the help of wood screws or bolts. You must keep the distance as previously thought out, otherwise the scaffolding will not fit into the foundation excavations. The other pair of posts you then also connect to the crossbar, before you can install the crossbars.

For this you need several helpers to keep both scaffold parts parallel. Two somewhat stronger cross braces should connect the scaffold parts parallel to each other, so that the scaffold holds together firmly. It is important to now also attach supports for the thicker cross beams to ensure a good hold. These should connect the angle between the vertical post and the end of the crossbar, or alternatively be attached on the inside. Such supports round off the angular rose arch also visually, because here later plants can climb and cover the supports.

Now the remaining cross braces are attached, as you like it optically best. These serve less for the stability of the scaffolding, but rather for the optics and to provide more support for the climbing plants and to make it easier for them to get to the top. If you have longer crossbars, you can also attach them crossing each other to get the typical romantic look.

Step 3 – Erect the scaffold

Once the scaffold is built and it seems stable enough at first sight, it can be placed in the excavated holes or attached to the used beam shoes. If the posts fit exactly into the joist shoes, they only have to be fixed with cross bolts. If you want to put them directly into the foundation, you should first fill the excavated holes with some gravel and then concrete. Promptly bring in the framework and hold it in place until the mixture has dried sufficiently. The selected plants can be planted at will exactly between the dug holes, from where they should reach the cross braces of the scaffold well. However, this should only be done after the glazing has been done or the desired painting has been done.

What else needs to be considered?

In any case, when buying the connecting screws, make sure to get hold of ones for outdoor use. Rustproof screws are an absolute must if the framework is to remain stable for several years and not suddenly break apart or even lose individual parts. pine and spruce are well suited wood species. But of course, many other options can be used, if you are suitably advised by professionals on weather resistance and glaze.

As you can see, it is not particularly difficult to build a rose arch yourself – only typically semicircular you can get it at the top alone only with difficulty. By the way, a tip is to do without perfectly cut beams and crossbars – dried branches and sufficiently thick trunks of felled young trees can also be used and provide irregularly applied for a rustic look, which is emphasized especially by the bark of the trunks and branches. Once the plants are climbed, one is rewarded with a relaxing spot.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: